Water damage can be a real hassle to deal with, both financially and logistically. In order to minimize the chances of water damage happening in your home, here are three tips to keep in mind. First, always check for leaks and fix them as soon as possible. Second, elevate any electronics or appliances that may be susceptible to water damage. And finally, have a plan in place for what to do if water does enter your home. Implementing these tips will help keep your home restore water damage and prevent costly repairs down the road.
1. Inspect your home for any leaks and fix them immediately
Water waste in a house is usually caused by leaks. It could be a faulty tap, broken pipe, leaking toilet cistern or maybe the roof is not properly sealed and leaves room for rain to get in.
You can find these leaks easily when you inspect your home for water wastage. In the bathroom, check the taps and commode flush. You can also check for leaks in the roof or anywhere else that you think it is possible.
Once you have found your home's water leak, take action immediately to fix them all. If you do not act quickly, your habitual wastage will only get worse—and more expensive. This means that if you are wasting 100 liters of water daily and do nothing about it, after one year it adds up to 10,000 liters of water! That is a lot of water wasted!
Gain access to the house's main valve The main house valve works like an off/on switch for your home's water supply. It lets you control the flow of water into your house, and thus is a great place to stop any leaks from happening. You will usually find this in the garage or basement area, depending on where the main cutoff valve is installed in your home.
Turn off all faucets and commodes If there is a leaky toilet it can be quite difficult to detect since most plumbing fixtures are hidden behind walls and cabinets. But if you suspect that the commode flushing system has some problem, it may be best to shut off the water leading to its tank so as not to add more water wastage while trying to fix it.
2. Install a water alarm to detect any leaks or flooding in your home
A water alarm is a unique device that sounds an alarm as soon as it detects water or moisture in your home. It's a great way to ensure early detection of flooding and leaks, which can save you money on costly repairs. A water alarm is also important during wintertime. Just more than 1 percent of all home fire deaths occur each year due to heating system failures, according to the National Fire Protection Association. You want to make sure that if your heating system springs a leak while it's running, you'll hear about it right away!
How does a water alarm work? Most alarms are battery-operated devices with probes designed to sense moisture; when the probe comes into contact with even less than one cup of water, it sets off a shrill automated warning.
Water alarms are practical and easy to install, usually with no tools required. In many cases, the probes simply stick to pipes or other surfaces near water sources - as long as they're dry-and the alarm rings if those areas ever get wet. Some units have adhesive backs that attach to nonporous surfaces such as shower walls and tile floors; others must be temporarily attached with small nails or screws. Other models can be secured permanently using masonry fasteners, screws or double-sided tape.
3. Install water detection devices that leak early on
If you have any leaks in your home, it might start to feel like a theme park. If you find one, fix it immediately! It may seem obvious but water damage is the #1 cause of major house fire and flooding disasters in the United States each year. A surprising amount of water can be wasted from even seemingly harmless things such as leaving the tap open while shaving or brushing teeth; dishwasher overflows; leaky faucets; clogged toilets; broken washing machine hoses and outside spigots left on.
If you spot a leak under your sink (likely if your cabinets are wet) shut off the main shut-off valve that supplies water to everything in the house (that every faucet and appliance is hooked up to), and if you can't find it call a professional plumber.
4. Check your water pressure
If your home does not have shut-off valves for every room, try to stop the water in another way. Turn off the corresponding faucet or unplug/shut off an appliance that could be causing trouble if it were left on when water levels got too high, but do not rely on this method alone! Shutting down your electrical system isn't worth risking injury or possible damage if it doesn't work, so remember the main thing: Fix any leaks you see immediately!
Conclusion paragraph:
Water damage can be a real headache. Whether it's a flood, a burst pipe, or just rain seeping in through cracks in the windows, water can cause serious damage to your property if not taken care of quickly. Not only does water damage ruin your possessions, it can also lead to expensive repairs and even health hazards if left untreated. If you're experiencing water damage in your home or office, don't wait to call a professional water damage repair service today. Contact EZ Restoration USA today for a free consultation about our services! They'll have everything they need to get the job done quickly and effectively, so you can start rebuilding your life as soon as possible.
Author Bio:- Billy Hust
Billy is a marketing manager at EZ Restoration USA. Her extensive knowledge of plumbing services has helped many people to overcome water damage and slab leak repair issues in their homes and offices. Through her blogs, she shares valuable information to the people across the USA about the advantages of AC & other appliances installation in San Diego, why regular maintenance of the HVAC system is required, and how to detect, prevent, and fix the water damage and slab leaks in your property.
Stay tuned with her recent posts and lead a comfortable life through extensive information of signs of issues in plumbing and HVAC systems and the right solution to fix it.
Comments